ErgoMaster pull-down ratchet lashing strap 2,000/50 with STF 720
ErgoMaster pull-down ratchet lashing strap 2,000/50 with STF 720
Select Model
Tension Force Indicator
Show the pre-tensioning force achieved
With the TFI you can read off the pre-tensioning forces achieved in the lashing system when tying down loads and use this information in load control calculations.
Self-locking ratchet lever
Prevents unintetional opening
The ratchet opening during transportation is thus effectively ruled out - eben when the load is exposed to strong vibrations and shaking.
Extended Ratchet Lever
Better power transmission and more ergonomic
The extended lever not only allows the user to achieve increased pre-tensioning forces can be achieved with markedly less muscle power.
Epoxy resin coating
Maximum ratchet protection
Ratchets are first zinc-plated, then chrome-plated and coated with a shock-resistant epoxy resin coat which additionally protects the ratchets from e.g. rust.
Precision strap
Low elasticity of the strap
Less stretch maintains more tension and reduces the need for tension readjustment.
TFI at adjustable end
When it comes to the pre-tensioning forces in your lashing strap systems, you need to make some careful calculations. According to DIN EN 12195-1:2004 you may usually only take 50% of the pre-tensioning force of the fixed end into account for the STF value of the fixed end and for the adjustable end. However, if you can prove that a higher pre-tensioning force is attained, you may take the actual force measured into account. This means, for example, that if you prove there are forces of 750 daN at both the adjustable end and the fixed end, you can incorporate this 1,500 daN of pre-tensioning force into your calculation. This is also enabled by our unique aid, the TFI, which can also be used at the adjustable end. By means of a special adaptor , the TFI can be integrated with all current end fittings. In addition, SpanSet has specially designed a delta hook to which the TFI can easily be attached. This results in an additional cost saving. When using the TFI, the STF that can be proven is significantly higher than that indicated on the label. This means that you save money when loading and unloading, as you need less lashing equipment.
Product Technical Information
-
Standard Tension Force
720 daN -
Standard Tension Force (with TFI)
1000 daN -
Norms
EN 12195-2: 2001 -
Webbing Width B
50 mm -
Label Protection
Yes -
Ratchet Type
Pull-down -
Tension Force Indicator (TFI)
Yes -
Packaging Unit (PU)
pcs -
Packaging Unit (PU) Content
1
Technical Drawings
Variants information
| Item Number | Item Name | Dimension L1 | Dimension L2 | Dimension L3 | Ratchet Component | Lashing End Fitting Component | Lashing Type | Lashing Capacity |
|---|---|---|---|---|---|---|---|---|
| 2003010 | ErgoMaster LC4000/50 1pc 8m | 8 m |
|
|
One-piece | 4000 daN | ||
| 2003508 | ErgoMaster LC2000/50/STF720 2pc 8m DJH | 8 m | 0.5 m | 7.5 m |
|
|
Two-piece | 2000 daN |
| 2003509 | ErgoMaster LC2000/50/STF720 2pc 8m SHD | 8 m | 0.5 m |
|
Delta with Triangle hook |
Two-piece | 2000 daN | |
| 2004023 | ErgoMaster LC2000/50/STF720 2pc 8m DJHS | 8 m | 0.5 m | 7.5 m |
|
Double J-Hook Safety Latch |
Two-piece | 2000 daN |
| 2004024 | ErgoMaster LC2000/50/STF720 2pc 8m RH | 8 m | 0.5 m | 7.5 m |
|
Rave Hook (RH) |
Two-piece | 2000 daN |
| 2025116 | ErgoMaster LC2000/50 2pc 8.5m DJH | 8.5 m | 0.5 m | 8 m |
|
Double J-Hook |
Two-piece | 2000 daN |
| 2025117 | ErgoMaster LC2000/50 2pc 8.5m DJH | 8.5 m | 0.5 m | 8 m |
|
Double J-Hook Safety Latch |
Two-piece | 2000 daN |
| 2025118 | ErgoMaster LC2000/50 2pc 8.5m RH | 8.5 m | 0.5 m | 8 m |
|
Rave hook |
Two-piece | 2000 daN |
| 2025119 | ErgoMaster LC2000/50 2pc 8.5m TH |
|
Triangle Snap Hook |
Two-piece | 2000 daN |