SpanSet ABS LC12500/75 carlash 4m DH Heavy duty ratchet Main picture small
SpanSet ABS LC12500/75 carlash 4m DH Heavy duty ratchet Small picture 1
SpanSet ABS LC12500/75 carlash 4m DH Heavy duty ratchet Small picture 2
SpanSet ABS LC12500/75 carlash 4m DH Heavy duty ratchet Small picture 3
SpanSet ABS LC12500/75 carlash 4m DH Heavy duty ratchet Small picture 4

ABS 12500daN 75mm

EUR 721,20

VAT not included

ABS 12500daN 75mm

Ideal for diagonal lashing of heavy-duty vehicles and machinery

EUR 721,20

VAT not included


Available within 10-15 Days
Item Number: 2003004
SSDE ERP Code: D012776
ABS LC12500/75 carlash 4m DH
Two piece with Delta & Hook, 12,500 LC (daN), Std Length 4m, Std Length at Fixed End 0.7 m
  • Tensioning device can be released gradually, self-locking and equipped with double slider
  • Epoxy resin-coated tensioning device made from hardened material and with reinforced bars
  • With TFI as standard
  • Reliable lashing force of up to 12,500 daN

Select Model

EUR 721,20

VAT not included


Available within 10-15 Days
...

"Anti-Belt-Slip" procedure

Controlled tension liberation

The ABS system was developed for loads with a risk of tipping and allows the user to release the pretension in small steps. The lashing can also be opened completely.

...

Self-locking ratchet lever

Prevents unintetional opening

The ratchet opening during transportation is thus effectively ruled out - eben when the load is exposed to strong vibrations and shaking.

...

Tension Force Indicator

Show the pre-tensioning force achieved

With the TFI you can read off the pre-tensioning forces achieved in the lashing system when tying down loads and use this information in load control calculations.

...

Double Slider

Safe in the intermediate phase when tensing

Secures in the intermediate stage when tensioning the webbing. Two sliders engage in an existing sprocket in "smaller steps".

...

Epoxy resin coating

Maximum ratchet protection

Ratchets are first zinc-plated, then chrome-plated and coated with a shock-resistant epoxy resin coat which additionally protects the ratchets from e.g. rust.

Reinforced bar

This high-performance ratchet is further reinforced by a double bar, meaning that the load is distributed between three points rather than just two. This results in extremely high loading capacity and stability.

 

Tension Force Indicator (TFI)
The standard TFI in this high-performance lashing serves as a safety element against unintentional overtensioning; i.e. optimum tension in relation to the lashing force (LC).

 

"Anti-Belt-Slip" procedure
This gives you full control even when releasing. With the ABS system you can release the pre-tensioning force in small steps. Loads that are in danger of tipping over and lean into the belt can thus be straightened in time with the truck. This helps to prevent damage and accidents.

Product Technical Information

  • Surface Coating
    Epoxy
  • Norms
    EN 12195-2: 2001
  • Webbing Width B
    75
  • Dimension L2
    0.7 m
  • Label Protection
    Yes
  • Colour
    NATO Green
  • Webbing Material
    Polyester, thermofixed and low-stretch <4%
  • Ratchet Type
    Push-up
  • Lashing End Fitting Component
    29044 DH-50
  • Tension Force Indicator (TFI)
    Yes
  • Lashing Type
    Carlash
  • Packaging Unit (PU)
    pcs
  • Packaging Unit (PU) Content
    1
  • Private Label
    Yes
  • Lashing Capacity
    12500 daN
  • Anti Belt Slip (ABS)
    Yes
  • Handle Type
    Standard

Technical Drawings

Item Number Item Name Weight Net Dimension L1 Dimension L3
2003004 ABS LC12500/75 carlash 4m DH 16.5 kg 4 m 3.3 m
2003498 ABS LC12500/75 carlash 6m DH 17.5 kg 6 m 5.3 m