NEW! SpanSet HSL2
Temporary Horizontal
Safety Line
In safety there is no room for doubt!
Take the guesswork out of temporary anchor lines
Know they are set up correctly and safe!
- Ratchet with a unique 'fill line' indicator - confirming to the installer when the ratchet is loaded to the correct number of turns of webbing to lock it securely under tension.
- Tension Force Indicator (TFI) Allows the worker to confirm the tension is applied by the ratchet to the line is correct every time!
- Web wear indicator Built-in web wear indicator for ease of inspection.
- Connection Rings prevents carabiners from snagging on the strap.
- Tested under cyclic loading conditions - to ensure they are suitable for windy conditions.
Instalation Guide
Intuitive to set up, secure and tension correctly
Step 1
First anchorage point
Connect the hook to the anchor point. Meet the new Viper Anchor sling that will make your anchoring easier.
Step 2
Release the lifeline travel
Thanks to the swivel hooks it will prevent the fabric from twisting.
Step 3
Second anchorage point
Connect the second hook to the end of the section to be secured.
Step 4
Apply the correct tension
Specially designed Ratchet will help you to ensure that the line is correctly aligned and that the tension is correct thanks to the built-in TFI.
Tension Force Indicator [ TFI ]
Allows the worker to confirm the tension applied by the ratchet to the line is correct every time!
When using a temporary horizontal anchor line, it is essential workers know how much the web would deflect in the event of a fall. This is critical for fall arrest applications where too much deflection of the line could mean there might not be enough clearance height.
Freedom to move safely
Up to 20m of reliable, dependable anchor point.
Allowing freedom for the worker to move in a wider area along the line with increased efficiency - as there's no need to waste time locating individual anchors.
Protecting workers when accessing unprotected edges in a wide variety of industries from construction (eg slab edge installations), nuclear, warehousing to marine.
Components
Quality components, specifically designed to be fit for purpose
Anchor Hooks
Safety swivel takes the twist out of the webbing during installation. The hooks always remain closed and secure under load.
Connection Rings
Two in-line to ensure all lanyard karabiners and hooks are compatible. The rings slide freely along the line, allowing the worker to move easily and reducing wear and tear – no ill-fitting karabiners catching on the webbing.
Integrated transport/storage bag
Specifically designed to ensure set up of the line is intuitive, transport around site is straightforward and any spare adjustment webbing can be packed away in the bag reducing wear and tear.
When lives depend on it
Be sure with SpanSet!
For over 20 years, SpanSet have led the way with our iconic HSL 'Red SpanSet', often copied, never equalled!
Drawing from our Height Safety, Lifting and Load Control manufacturing expertise, we have combined innovative design with quality components to produce our best horizontal webbing anchor line yet. The HSL2 allows your workforce to focus on the job in hand, confident their safety line is correctly set up, strong and will protect them when working near exposed edges.