ErgoABS 2500/50 STF 750
ErgoABS 2500/50 STF 750
High tension force with less muscle power
- ERGO - Pull-down principle and extended ratchet handle for ergonomic and better transmission of force.
- ABS - Controlled tension liberation.
- TFI - Integrated tension indicator.
- Coated with epoxy resin.
- Low-stretch, wear-resistant webbing with cord edge and marking stripes.
- Robust label, resistant to being pulled out, protected by plastic sleeve and webbing insert.
Select Model
Pull-down Ratchet
More tension force, less muscle force
Allows greater pretension force to be achieved with significantly less muscle power.
"Anti-Belt-Slip" procedure
Controlled tension liberation
The ABS system was developed for loads with a risk of tipping and allows the user to release the pretension in small steps. The lashing can also be opened completely.
Tension Force Indicator
Show the pre-tensioning force achieved
With the TFI you can read off the pre-tensioning forces achieved in the lashing system when tying down loads and use this information in load control calculations.
Self-locking ratchet lever
Prevents unintetional opening
The ratchet opening during transportation is thus effectively ruled out - eben when the load is exposed to strong vibrations and shaking.
Double Slider
Safe in the intermediate phase when tensing
Secures in the intermediate stage when tensioning the webbing. Two sliders engage in an existing sprocket in "smaller steps".
Extended Ratchet Lever
Better power transmission and more ergonomic
The extended lever not only allows the user to achieve increased pre-tensioning forces can be achieved with markedly less muscle power.
Reinforced edges
Longer service life and lower costs!
Webbing with the reinforced edge is more resistant to wear and abrasion.
Precision strap
Low elasticity of the strap
Less stretch maintains more tension and reduces the need for tension readjustment.
Protective sleeve label
optimally protected, reinforced with selvedge
In addition to the tear-resistant design with a fabric lining, a robust plastic sleeve perfectly protects the writing from abrasion and dirt. The webbing insert, equipped as standard, also prolongs the service life.
ErgoABS pull-down ratchet
Makes your work easier and makes checking security quick and simple
- ERGO - High pre-tensioning forces using much less muscle power!
Pull-down ratchet with longer handle protects your back and help you getting high pre-tensioning. - “Anti-Belt-Slip” procedure
The ABS system lets you release the pre-tension force in small steps. This gives you the opportunity to use a fork-lift truck to straighten up any loads that threaten to tip and are leaning into the lashing, helping prevent damage and accidents. - Tension Force Indicator
Patented TFI, you can verify the pre-tension force in the system quickly and easily. When the jaws of the TFI are closed, it indicates the maximum pre-tensioning force that can be achieved of 750 daN. Intermediate stages can also be read off. - Optional integrated edge protection
Straps by SpanSet are available with a low elasticity of max. 4%. Thanks to the additional wear-resistant selvedge, they won’t wear away, even on rough loads, meaning you have a tough partner on your side to achieve load security. - Protected Safety label
Always check whether the ratchet lashing strap is suitable for the load to be secured, each lashing strap is equipped with a patented safety label that cannot be torn out. The lashing strap may not be used without its label.
Product Technical Information
-
Standard Tension Force:
350 daN
-
Standard Tension Force (with TFI):
750 daN
-
Norms:
EN 12195-2: 2001
-
Webbing Width B:
50
-
Ratchet Component:
927 RB ERGO ABS LC25kN 50mm BL
-
Label Protection:
Yes
-
Colour:
Yellow
-
Webbing Material:
100% Polyester, thermofixed and low-stretch
-
Ratchet Type:
Pull-down
-
Tension Force Indicator (TFI):
Yes
-
Lashing Type:
Two-piece
-
Packaging Unit (PU):
pcs
-
Packaging Unit (PU) Content:
1
-
Lashing Capacity:
2500 daN
Product downloads and manuals
Technical Drawings
Variants information
| Item Number | Item Name | Surface Coating | Dimension L1 | Dimension L2 | Dimension L3 | Lashing End Fitting Component |
|---|---|---|---|---|---|---|
| 2004022
SSUK ERP Code: 20050-2-01228-8M-050 |
ErgoABS LC2500/50 2pc 0.5m 7.5m DJH | Epoxy | 8 m | 0.5 m | 7.5 m |
Double J-Hook DJH-50 |
| 2004475
SSUK ERP Code: 20050-2-01228SL-8M-050 |
ErgoABS LC2500/50 2pc 7.5m 0.5m DJHS | Epoxy | 8 m | 0.5 m | 7.5 m |
Double J-Hook Safety Latch DJHS-50 |
| 2020330
SSUK ERP Code: 20050-2-01228-6M-050 |
ErgoABS LC2500/50 2pc 5.5m 0.5m DJH | Epoxy | 6 m | 0.5 m | 5.5 m |
Double J-Hook DJH-50 |
| 2020331
SSUK ERP Code: 20050-2-01228-10M-050 |
ErgoABS LC2500/50 2pc 0.5m 9.5m DJH | Epoxy | 10 m | 0.5 m | 9.5 m |
Double J-Hook DJH-50 |
| 2020333
SSUK ERP Code: 20050-2-01228SL-10M-050 |
ErgoABS LC2500/50 2pc 9.5m 0.5m DJHS | Epoxy | 10 m | 0.5 m | 9.5 m |
Double J-Hook Safety Latch DJHS-50 |
| 2024610
SSUK ERP Code: 20050-2-01228-8M-030 |
ErgoABS LC2500/50 2pc 7.7m 0.3m DJH | Epoxy | 8 m | 0.3 m | 7.7 m |
Double J-Hook DJH-50 |
| 2024611
SSUK ERP Code: 20050-2-01228-10M-030 |
ErgoABS LC2500/50 2pc 9.7m 0.3m DJH | Epoxy | 10 m | 0.3 m | 9.7 m |
Double J-Hook DJH-50 |
| 2024612
SSUK ERP Code: 20050-2-01288SL-8M-030 |
ErgoABS LC2500/50 2pc 7.7m 0.3m DJHS | Epoxy | 8 m | 0.3 m | 7.7 m |
Double J-Hook Safety Latch DJHS-50 |
| 2024613
SSUK ERP Code: 20050-2-01288SL-10M-030 |
ErgoABS LC2500/50 2pc 9.7m 0.3m DJHS | Epoxy | 10 m | 0.3 m | 9.7 m |
Double J-Hook Safety Latch DJHS-50 |
| 2024614
SSUK ERP Code: 20050-2-CLR-8M-030 |
ErgoABS LC2500/50 2pc 7.7m 0.3m CLR | Epoxy | 8 m | 0.3 m | 7.7 m |
Closed Rave Hook CLR-50 |
| 2024615
SSUK ERP Code: 20050-2-CLR-10M-030 |
ErgoABS LC2500/50 2pc 9.7m 0.3m CLR | Epoxy | 10 m | 0.3 m | 9.7 m |
Closed Rave Hook CLR-50 |
| 2027004
SSUK ERP Code: 20050-2-01228SL-4M |
ErgoABS LC2500/50 2pc 3.5m 0.5m DJHS | coated | 4 m | 0.5 m | 3.5 m |
Double J-Hook Safety Latch DJHS-50 |