Capcha - Vehicle Fall Protection
The Overhead Fall Arrest System that travels with your vehicle and keeps Drivers and Loaders safe.
Provides protection from ground level to the trailer and back to the ground. Tested to DIN EN 795:2012
More than 2000 serious injuries to people falling from vehicles are reported to HSE each year. Many of these injuries are broken arms or legs, resulting in weeks off work and possible loss of earnings. There are probably many more injuries that are not reported’.
Source Health and Safety Executive
An industry leader, SpanSet have been designing and manufacturing innovative solutions to the problems associated with loading and unloading goods for over 25 years.
Our unique Capcha fall arrest system minimises the likelihood and consequences of a fall. The block stops the fall and the shock absorber integrated in the wire system dissipates the energy. The combination of the Capcha system and associated training gives reassurance to both employer and the driver/loader that working at height - gaining access/egress from the vehicle deck and working adjacent to the exposed edges to the rear and sides of the vehicle - is safe.
SpanSet’s Capcha system sets the standard and is backed by our excellent customer support and technical expertise.
The block stops the fall and the shock absorber integrated in the wire system dissipates the energy.
Fits unobtrusively inside the roof of the trailer and does not obstruct loading or unloading.
CAPCHA – Simple to Install
- Ideal for use with most types of curtainsided and rigid vehicles. Solutions also available for double-deck trailers
- May be specified as original equipment or retro-fitted to your fleet.
- Installation service or train you to become an approved CAPCHA installer.
- Straightforward kits supplied designed to be cut to length and terminated on site without the need for special tools.
- Permanently fitted to the vehicle body.
- Stainless steel and performance coatings for maximum lifespan
- Low maintenance when annually inspected in accordance with BS7883:2005
CAPCHA – Simple to use
- Allows secure, unrestricted access to the trailer deck and enables hands free working.
- Runs smoothly as driver/loader walks along the trailer deck.
- SpanSet Training available
Hands free operation.
Smooth performance.
Safe connection to system before leaving the ground.
Annual visual inspection required in accordance with BS7883:2005.
Related products
HT-8 Overhead Workshop System
For situations where a permanent, static height safety arrangement is required at a fixed base or location - vehicle maintenance for example.
Wherever personnel are working at height, they are at risk of sustaining injury as a result of a fall. In siutations where the working height occurs in a fixed location with superstructure overhead, HT-8 can be installed in a single span of up to 40m, enabling your staff to carry out their tasks in complete safey.
SpanSet Driver Harness
- Full body harness for Fall Arrest systems.
- Fall arrest attachment point on integral extension strap making it easy for the user to reach and removing all metalwork from the rear of the harness - more comfortable to wear when driving.
- Adjustment in the leg loops, shoulders and chest.
- Stainless steel buckles and fittings with fast clip buckles for ease of use.
- Available in standard size with concealed panels in hi-vis jacket to fit larger operatives.
- Supplied with clear instructions and individually serial numbered certification for traceability.
- CE approved to EN361, EN354 and EN 471.