Benefits
Mengapa menggunakan WORKSECURE?
- Cocok untuk semua jenis atap termasuk slab beton, lembaran atap terprofil, sambungan berdiri, dan atap membran.
- Diuji dan Disertifikasi oleh lembaga eksternal yang terdaftar sesuai EN795:2012 Kelas C dan memenuhi serta melebihi persyaratan PD CEN/TS 16415:2013.
- Paket perhitungan komputer menjamin semua instalasi berada dalam batas kerja yang aman.
- Semua komponen terbuat dari stainless steel kelas pesawat.
- Dirancang untuk menyediakan sambungan aman untuk tim hingga 4 pekerja dengan berat masing-masing 140kg.
- Perangkat penurun energi yang unik memungkinkan kinerja sistem disesuaikan dengan kebutuhan instalasi.
- Bagian multifungsi untuk menyediakan traversing garis hidup tanpa tangan secara kontinu.
- Braket dan komponen dirancang untuk memudahkan navigasi di sudut, kontur, dan kemiringan.
Who is WORKSECURE intended for?
- Property Maintenance To protect technicians carrying out routine maintenance and inspections of the property or plant.
- Construction To protect workers during the construction phase, but also commonly specified by Architects as an integral aspect of the build to permit safe access for maintaining the property once complete.
- Warehousing & Distribution – To provide users safe access to storage racking for misaligned pallets, routine maintenance, and general cleaning of the area.
- Bridges & Infrastructure – To permit safe access for engineers once erection is complete to conduct inspections and maintain the structure.
- Leisure & Entertainment – To protect workers whilst conducting installation, operating equipment and maintenance activities including lighting/sound gantries, theatrical props, etc.
- Transport – Installed internally or externally in maintenance & loading bays or directly to suitable vehicles to permit safe access for persons needing to work at height on vehicles.
- Manufacturing – To permit access for maintenance technicians and assembly workers on large scale production lines as found in the automotive and aerospace sectors.
- Oil/Gas Processing – To permit access for workers to areas of the production plant, platforms and processing equipment to perform routine maintenance and servicing tasks.
- Cranes – To protect operators or technicians whilst conducting routine inspection and maintenance activities or when accessing driver’s cabs etc. Can be attached directly to the crane beam.
- Power Stations – To permit workers to access areas of the plant necessary to perform routine maintenance activities. The Safeline System can be attached to a variety of suitable structures found within such locations.
Types of permanent Lifelines
Capcha
Overhead horizontal Lifeline
Provide snag free travel along the installed lifeline and due to the rigid nature of the CAPCHA Workshop system, it can support heavier retractable type fall arrest devices without causing excessive sag in the lifeline under the device weight.
Stoppa
Work Restraint system
Allows you freedom of access to the top of the vehicle/container including all the perimeter edges, however with no risk of falling.
SecureClimb
Vertical Lifeline System
Offers market leading fall protection for work at height on any type of fixed industrial ladder or suitable vertical structures such as electricity pylons.
SpanSet Certified Safety
Mitra Anda untuk Keamanan Ketinggian, Pengangkatan, dan Kontrol Beban
Tim ahli kami akan menjawab pertanyaan Anda untuk menawarkan opsi terbaik